Chiral Dinuclear EuIII,TbIII, and YIII Complexes Supported by P-Stereogenic Linear Tetraphosphine Tetraoxide

A P-stereogenic linear tetraphosphine tetraoxide, (R,R)- or (S,S)-dpmppm(=O)₄, was synthesized to prepare C₂ dinuclear M(hfa)₃ complexes (M=Eu, Tb, Y) as the first example of lanthanide(III) complexes with P-chiral multidentate phosphine oxides. The mononuclear M(hfa)₃ complexes (M=Eu, Y) with a P-chiral diphosphine dioxide, tpdpb(=O)₂, were also prepared, and comparison of their photophysical properties for the Eu^III complexes revealed that significant chiral induction from the P-chiral centers arises on the achiral M(hfa)₃ units through intramolecular π-π stacking constraint in the dinuclear system.     

Multiply Twisted Chiral Macrocycles Clamped by Tethered Binaphthyls Exhibiting High Circularly Polarized Luminescence Brightness

Chiral macrocyclic dimers, trimers, and tetramers composed of paraphenylene and tethered binaphthyl were synthesized, and their molecular structures and chiroptical properties were investigated. X-ray analysis and theoretical calculations revealed that multiple twisted molecular structures – dimers, trimers, and tetramers – adopt figure-of-eight, Möbius triangle, and concave rectangle structures, respectively. These homologues have large ϵ values in their UV-vis absorption spectra because of the π-conjugation of the naphthalene-phenylene-naphthalene frameworks. Owing to the shape-persistent ring structure and tethering with −OCH₂CH₂O−, high fluorescence quantum yields and a relatively high dissymmetry factor g_CPL in circularly polarized luminescence (CPL) spectra were achieved. This results in CPL brightness (B_CPL) of over 100, which is greater than that of the conventional organic CPL dye.     

Circularly Polarized Luminescence and Circular Dichroism of Bichromophoric Difluoroboron-β-diketonates: Inversion and Enhanced Chirality Based on Spatial Arrangements and Self-Assembly

We synthesized two bichromophoric difluoroboron-β-diketonates (DFB) connected in para and meta positions by using cyclohexane diamine as a chiral bridge ( para and meta (R/S)-CyDFB ). TD-DFT calculations revealed that the variation in connectivity of the DFB units leads to different spatial arrangements and a chirality inversion of the bichromophoric DFB. Higher g_abs values were obtained in (R/S)-CyDFB connected in para as compared to meta position. Aggregation of para (R/S)-CyDFB in mixture of solvents increase the g_lum values as compared to its monomeric form. Ultrasonication and heating induced the formation of highly ordered nano-helical wires of para (R/S)-CyDFB that increased the g_lum values to 0.015. On the other hand, meta (R/S)-CyDFB failed to form highly ordered self-assembled wires due to hindered H-binding sites. These observations indicate that the chiroptical properties of DFB bi-chromophore system can be modulated with self-assembly and spatial arrangement of the chromophores.     

Amino-Acid-Induced Circular Polarized Luminescence in One-Dimensional Manganese(II) Halide Hybrid

Circular polarized luminescence (CPL)-active materials attract great attentions owing to their widely applications in 3D optical displays and encrypted transmission. Inspired by the strategies adopted in perovskite based CPL materials, herein, CPL-active hybrids (D)- and (L)-(tert-butyl prolinate)MnCl₃ were successfully prepared by assembling chiral D/L tert-butyl prolinate with manganese (II) chloride. Single crystal structures show the as-formed hybrids possess one-dimensional (1D) structure containing linear chains of face-sharing MnCl₆ octahedral surrounded by prolinate cations. The 1D Mn(II) hybrids display strong red emission peaked at 646 nm with PLQY of 67.1 % and 57.2 % for d -type and l -type, respectively, representing the highest PLQY for 1D Mn^II hybrids. Interestingly, the 1D Mn(II) hybrids exhibit prominent circular dichroism (CD) signals and remarkable CPL activity with the dissymmetry factor g of 6.1*10⁻³ and −6.3*10⁻³ from 550 to 800 nm for (D)- and (L)-(tert-butyl prolinate)MnCl₃, respectively, owing to the existence of chiral cations. It is worthy noted the obtained g represents the highest value for non-lead organic–inorganic hybrids.     

High-temperature fluorescence of low- and high concentration aqueous ATP solution

Abstract

The results of an experimental study of luminescence of an aqueous solution of adenosine triphosphate (ATP) at room temperature are presented. High-temperature fluorescence of low- and high-concentrated solution was experimentally detected and analyzed. The shape of the fluorescence spectrum, the excited state lifetime and the temperature behavior of the emission intensity indicate the formation in the high-concentrated solution of rather stable dimer-like complexes, which can form excimer states.     

不同晶体结构Gd2(MoO4)3:Eu3+荧光粉的合成及其发光性能研究

采用溶胶凝胶-燃烧法,柠檬酸为络合剂合成出系列Gd₂(MoO₄)₃:Eu³⁺荧光粉.利用X射线衍射(XRD)、扫描电子显微镜(SEM)和荧光光谱对样品的结构、形貌和发光性能进行了研究.XRD分析表明:稀土离子与柠檬酸为1:0.5时,800℃热处理获得单斜结构的Gd₂(MoO₄)₃:Eu³⁺荧光粉.单斜结构的Gd₂(MoO₄)₃:Eu³⁺荧光粉到正交结构的Gd₂(MoO₄)₃:Eu³⁺荧光粉的转换可以通过改变稀土离子与柠檬酸摩尔比和热处理温度等合成条件实现.Gd₂(MoO₄)₃:Eu³⁺荧光粉的形貌受合成条件的影响.荧光光谱研究表明:Gd₂(MoO₄)₃:Eu³⁺荧光粉的主发射峰位于616 nm处来自于Eu³⁺的⁵D₀→⁷F₂电偶极跃迁.正交结构的Gd₂(MoO₄)₃:Eu³⁺荧光粉发射强度明显高于单斜结构的荧光粉.计算⁵D₀→⁷F₂与⁵D₀→⁷F₁跃迁发射的相对强度比值表明:正交结构的Gd₂(MoO₄)₃:Eu³⁺中Eu³⁺局域环境的对称性较高。     

酰胺功能化修饰琼脂糖/硅胶复合材料的制备及吸附性能研究

采用溶胶-凝胶法,以氧化琼脂糖和四甲氧基硅烷为前驱体,通过水解、缩聚反应制得琼脂糖/硅胶复合材料,进一步利用开环、"巯-烯"点击和酰胺化反应对复合材料实现酰胺基团功能化修饰.借助红外光谱(FT-IR)、X射线光电子能谱(XPS)、扫描电子显微镜(SEM)对所制备复合材料进行结构、组成和微观形貌表征.以制备的酰胺功能化修饰琼脂糖/硅胶复合材料为吸附剂,探讨其对莱克多巴胺的吸附过程,实验考察了溶剂、吸附时间、莱克多巴胺的初始浓度等对吸附的影响.结果表明:经过修饰反应酰胺基团成功接枝到琼脂糖/硅胶复合材料,该材料颗粒呈球形,粒径在2～3μm之间;复合材料对莱克多巴胺表现出良好的吸附性能,吸附过程50 min达到平衡,适合准二级动力学特征,属化学吸附,吸附等温线符合Freundlich模型;复合材料经过6次吸附解析,再生后对莱克多巴胺的吸附率仅有小幅下降,表明具有较好的循环再生吸附能力.     

An Activatable Lanthanide Luminescent Probe for Time‐Gated Detection of Nitroreductase in Live Bacteria

Herein we report the development of a turn‐on lanthanide luminescent probe for time‐gated detection of nitroreductases (NTRs) in live bacteria. The probe is activated through NTR‐induced formation of the sensitizing carbostyril antenna and resulting energy transfer to the lanthanide center. This novel NTR‐responsive trigger is virtually non‐fluorescent in its inactivated form and features a large signal increase upon activation. We show that the probe is capable of selectively sensing NTR in lysates as well as in live bacteria of the ESKAPE family which are clinically highly relevant multiresistant pathogens responsible for the majority of hospital infections. The results suggest that our probe could be used to develop diagnostic tools for bacterial infections.